4-6
Configuring the I/O
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
Figure 4.8
Drive New Module Screen
3. On the General tab, edit the following data about the drive/adapter:
4. In the Module Definition section, click Change… to launch the
Module Definition screen (
) and begin the drive/adapter
configuration process.
Figure 4.9
Module Definition Screen
5. In the Module Definition screen, edit the following information:
Box
Setting
Name
A name to identify the drive.
Description
Optional – description of the drive/adapter.
IP Address
The IP address of the adapter.
Box
Setting
Revision
The major and minor revision of the firmware in the drive. If the drive’s
major and minor revision is not available, the drive database is not
installed on your computer. To get the correct database, click either the
Create Database…, Web Update…, or Match Drive button on the
bottom left of this screen. See the information following this table for
descriptions of each button.
