background image

Rockwell Automation Publication KNX-TD005A-EN-P - October 2021

53

Kinetix 300 and Kinetix 350 EtherNet/IP Servo Drives

AC Line Filters

The Kinetix 300/350 drives were tested by using recommended line filters. Use of these filters is also needed to meet CE requirements. The 2097-

V32PR0-

xx

, 2097-V32PR2-

xx

, and 2097-V32PR4-

xx

 drives have integrated AC line filters.

2097-F1 and 2097-F2 side-mount line filters add 35.8 mm (1.41 in.) to the width of your drive.

2097-F4, 2097-F5, and 2097-F6 rear-mount line filters add 48 mm (1.89 in.) to the depth of your drive.

AC Line Filter Specifications

AC Line Filter 

Cat. No.

Mount

Voltage

50/60 Hz

Phase

Current 

A @

 

40 °C (104 °F)

Power Loss

W

Leakage Current

mA

Weight, approx

kg (lb)

Kinetix 300/350 

(1)

Drive Cat. No.

(1) Use 2090-UXLF-110 (single-phase) line filter for 2097-V31PR0-

xx

 drive operation. Use 2090-XXLF-TC116 (single-phase) line filter for 2097-V31PR2-

xx

 drive operation. 

2097-F1

Side

240V AC

1

24.0

5.2

9.0

0.6 (0.13)

2097-V33PR6-

xx 

(2)

(2) Use 2097-F1 (single-phase) line filter for 2097-V33PR6-

xx

 (single-phase) drive operation. Use the 2090-XXLF-TC316 (three-phase) line filter for 2097-V33PR6-

xx

 (three-phase) drive operation.

2097-F2

480V AC

3

10.0

2.8

1.0

2097-V34PR6-

xx

2097-F4 

(3)

(3) This filter is rated for multiple voltage/phase line conditions.

Rear

240/480V AC

3

4.40

1.2

1.0

0.8 (0.18)

2097-V33PR1-

xx 

(4)

(4) Use 2090-UXLF-106 (single-phase) line filter for 2097-V33PR1-

xx

 (single-phase) drive operation.

2097-V34PR3-

xx

2097-F5 

(3)

6.90

1.3

2097-V34PR5-

xx

2097-V33PR3-

xx 

(5)

(5) Use 2090-UXLF-110 (single-phase) line filter for 2097-V33PR3-

xx

 (single-phase) drive operation.

2097-F6 

(3)

15.0

4.1

2097-V33PR5-

xx 

(6)

(6) Use 2090-UXLF-123 (single-phase) line filter for 2097-V33PR5-

xx

 (single-phase) drive operation.

Refer to the Kinetix Rotary and Linear Motion Cable Specifications Technical Data, publication 

KNX-TD004

 for AC line filter specifications not listed here.

00

300

35.8

(1.41)

150

(5.90)

166

(6.52)

2097-F1 or 2097-F2 

Side Mount

AC Line Filters

Kinetix 300/350

Drive

Dimensions are in mm (in.)

This connector ships prewired to 

the AC line filter.

4.1

(0.16)

219

(8.62)

Ø 4.6 

(0.18)

4.6

(0.18)

68.6

(2.70)

48.0

(1.89)

38.1

(1.50)

15.2

(0.60)

211

(8.31)

48.0

(1.89)

2097-F4, 2097-F5, or 2097-F6 

Rear Mount AC Line Filters

Kinetix 300/350

Drive

Dimensions are in mm (in.)

This connector ships prewired to 

the AC line filter.

Summary of Contents for Allen-Brandley Kinetix 2000







































































































































































Reviews: