42
Rockwell Automation Publication KNX-TD005A-EN-P - October 2021
Kinetix 300 and Kinetix 350 EtherNet/IP Servo Drives
Technical Specifications - Kinetix 300 and Kinetix 350 Servo Drives
The 2097-V31PR
x-xx
drives with 120V input are capable of driving 240V motors at full speed.
Kinetix 300/350 Drive (single-phase) Power Specifications
Attribute
2097-V31PR0
2097-V31PR0-LM
2097-V31PR2
2097-V31PR2-LM
2097-V32PR0
2097-V32PR0-LM
2097-V32PR2
2097-V32PR2-LM
2097-V32PR4
2097-V32PR4-LM
AC input voltage
70…132V rms single-phase
(120V nom) voltage-doubler mode
80…264V rms single-phase (120/240V nom)
80…264V rms single-phase (240V nom)
AC input frequency
48…62 Hz
Main AC input current
(1)
Nom (rms) 120V input (voltage doubler)
Max inrush (0-pk) 120V input
Nom (rms) 120/240V input
Max inrush (0-pk) 240V input
(1) Kinetix 300/350 drive modules are limited to 1 AC mains power cycling per every 2 minutes.
9.70 A
1.15 A
5.0 A
1.1 A
15.0 A
1.15 A
8.6 A
1.1 A
5.0 A
136 A
8.6 A
2.3 A
15.0 A
2.3 A
Integrated AC line filter
No
No
Yes
Yes
Yes
Control power back-up input voltage
20…26V DC
Control power back-up input current
Nom
Max inrush (0-pk)
500 mA
30 A
Continuous output current (rms)
2.0 A
4.0 A
2.0 A
4.0 A
8.0 A
Continuous output current (0-pk)
2.8 A
5.7 A
2.8 A
5.7 A
11.3 A
Peak output current (rms)
(2)
(2) Peak RMS current allowed for up to 2 seconds with a 50% duty cycle.
6.0 A
12.0 A
6.0 A
12.0 A
24.0 A
Peak output current (0-pk)
8.5 A
17.0 A
8.5 A
17.0 A
33.9 A
Continuous power output
(3)
@ 240V nom or 120V (voltage-doubler) mode
(3) Nominal continuous power output (kW) applies to 240V AC drives. Value is approximately one-half of this kW rating when using 120V AC.
0.40 kW
(4)
(4) The 120V voltage-doubler mode applies to only the 2097-V31PR
x-xx
drives.
0.80 kW
0.40 kW
0.80 kW
1.70 kW
Shunt on
390V DC
Shunt off
375V DC
Overvoltage
430V DC
Short-circuit current rating
100,000 A (rms) symmetrical
