manualshive.com logo in svg

Rockwell Automation Allen-Brandley Kinetix 2000, Original Instructions Manual

Share
Download
Rockwell Automation Allen-Brandley Kinetix 2000 Original Instructions Manual Download Page 160

160

Rockwell Automation Publication KNX-TD005A-EN-P - October 2021

Kinetix 2090 Interface Cables

Kinetix 6000M Network Cables

Kinetix 6000M network cables provide motion commands to the IDM units. Kinetix 6000M network cables are available in lengths up to 25 m (82 ft). 

The maximum combined cable length for all axes daisy-chained from the same IPIM module is 100 m (328 ft).

Typical Kinetix 6000M Network Cable Application

For example, in this Kinetix 6000M system, if each cable length was the maximum 25 m (82 ft), the combined cable length would be 75 m

(246 ft). The last IDM unit requires a 2090-CTSRP network terminator.

Kinetix 6000M Network Cables

Cat. No. 

Description

Cable Configuration
Pin

Socket

2090-CNSSPSS-AA

xx 

(1)

(1) Cables are available in standard lengths of 0.5, 1, 2, 3, 4, 5, 7, 9, 12, 15, 20, and 25 m (1.6, 3.2, 6.6, 9.8, 13.1, 16.4, 22.9, 29.5, 39.3, 49.2, 65.5, and 82.0 ft).

• Straight connector, pin (SP)

• Straight connector, socket (SS)

2090-CNSRPRS-AA

xx 

(1)

• Right-angle connector, socket (RP)

• Right-angle connector, socket (RS)

• Not compatible for connection to the IPIM module

2090-CNSRPSS-AA

xx 

(1)

• Right-angle connector, socket (RP)

• Straight connector, socket (SS)

• Not compatible for connection to the IPIM module

2090-CNSSPRS-AA

xx 

(1)

• Straight connector, pin (SP)

• Right-angle connector, socket (RS)

2090-CBUSPSS

• The network cable bulkhead adapter feeds signals through the cabinet wall

• Network cables attach on either side

2090-CTSRP

Network terminator

• Required on last IDM unit, right-angle, socket (RP)

• Included with each IPIM module

IMPORTANT

Right-angle (pin) connectors are not compatible for connection to the IPIM module. Only straight (pin) connectors fit properly.

Kinetix MDF
IDM Unit 3

2090-CNSSP

x

S-AA

xx

Network Cable 1

2090-CTSRP 

Network Terminator

2094-SEPM-B24-S

IPIM Module

Kinetix MDF
IDM Unit 2

Kinetix MDF
IDM Unit 1

2090-CNS

x

P

x

S-AA

xx

Network Cable 3

2090-CNS

x

P

x

S-AA

xx

Network Cable 2

This cable end 
must be a straight 
(pin) connector.

These cable ends can be 
straight or right-angle 
connectors

Summary of Contents for Allen-Brandley Kinetix 2000







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands