manualshive.com logo in svg

Rockwell Automation 700-1308-00, Service Manual

Share
Download
Rockwell Automation 700-1308-00 Service Manual Download Page 5

MagneMover LITE Service Manual

5

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

About This Manual

Overview

This section provides information about the use of this manual, including the manual struc-
ture, related documentation, and safety conventions.

Purpose

This manual provides service and maintenance information for the MagneMover

®

 LITE 

(MM LITE

®

) transport system, including basic troubleshooting.

Use this manual in combination with the other manuals and documentation that accompanies 
the transport system along with the training classes offered by MagneMotion to design, install, 
configure, test, and operate an MM LITE transport system.

Audience

This manual is intended for all users of MagneMover LITE transport systems and provides 
service and maintenance information for the MM LITE transport system.

Prerequisites

The information and procedures that are provided in this manual assume the following:

•

The personnel servicing the MagneMover LITE transport system have been properly 
trained on MM LITE transport system maintenance.

•

Basic familiarity with general-purpose computers and with the Windows

®

 operating 

system, web browsers, and terminal emulators.

•

Complete design specifications, including the physical layout of the transport system, 
are available.

Summary of Contents for 700-1308-00











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands