manualshive.com logo in svg

Rockwell Automation 700-1308-00, Service Manual

Share
Download
Rockwell Automation 700-1308-00 Service Manual Download Page 25

Safety

Pneumatic Hazards

MagneMover LITE Service Manual

25

Rockwell Automation Publication MMI-UM037A-EN-P - April 2020

Pneumatic Hazards

The precision locator is connected to the compressed air system in the facility, which is capa-
ble of generating hazardous energy. The proper precautions for operating and servicing pneu-
matic equipment must be observed. These precautions include following facility 
lockout/tagout procedures, and any other specified action within the facility where the MM 
LITE precision locator is being used.

The MagneMover LITE precision locator option is a low energy device, no additional pneu-
matic safety precautions are required.

CAUTION

Pneumatic Hazard

All pneumatic power to the MagneMover LITE transport
system must be disconnected per the lockout/tagout proce-
dure for the facility before servicing to help prevent the risk
of mechanical movement.

Do not turn on the pneumatic system until after connecting
all other transport system components.

Summary of Contents for 700-1308-00











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands