33
Install Super Deluxe Rebound Rod Sizing Pin
I n s t a l l S u p e r D e l u x e R e b o u n d R o d S i z i n g P i n
The rebound rod sizing pin must be installed into the eyelet, before
reassembly, to ensure the rebound needle assembly inside the damper
shaft is pressed to the correct position when the damper shaft and
piston assembly are tightened to the specified torque.
The Sizing Pin replaces the rebound adjuster detent spring and pin in
the eyelet during assembly and torque procedures. When the Sizing
Pin is removed, and the rebound adjuster detent spring and pin are
reinstalled, the needle assembly is set to the correct position in the
eyelet, which ensures the range of rebound adjustment is accurate
after assembly.
Insert the Super Deluxe rebound rod sizing pin into the detent spring
and pin slot in the eyelet. Push it in until it stops.
Super Deluxe Rebound Rod Sizing Pin
50.8 mm x 3.05 mm
Super Deluxe Rebound Rod Sizing Pin
Super Deluxe Rebound Rod Sizing Pin
1
Deluxe Rebound Rod Sizing Pin
Deluxe Rebound Rod Sizing Pin
