19
Assembly - Damper Shaft and Eyelet
Select R:
Insert the adjuster (A) gate block into the eyelet, in the
orientation pictured. Hold it in place with a non-metallic pick to align
the (C) alignment hole with the limit screw hole in the eyelet.
While holding the gate block in place with the pick, install the (B) cam
limit screw. Tighten the screw until it is flush with the eyelet.
Install the complete adjuster assembly into the eyelet. Press the
assembly in until it stops in place. Do not rotate the adjusters.
Install the (A) detent ball and the rebound adjuster (B) detent spring.
Select R
Select R
1.5 mm
A
B
C
Select R
Grease
Select R
14
Ultimate RCT
RL, RT
B
B
A
A
Select R
B
A
