14
Assembly - Damper Shaft and Eyelet
New damper shaft assembly:
Remove the compression poker
assembly from the damper shaft if it is installed in the kit.
Select R:
Apply grease to the compression poker (A) o-rings and set
the poker assembly aside. The compression poker will be installed
into the damper shaft after the piston assembly and rebound adjuster
assembly are installed.
Apply grease to the rebound poker assembly (B) o-ring.
Install the (C) rebound poker assembly, tapered end first, into the (D)
damper shaft until it stops.
Apply Loctite Threadlocker Blue 242 (or equivalent) to (A) 2 full threads
(only apply to threads) on the damper shaft.
Do not apply Threadlocker to the (B) rebound rod or rebound poker, or
to any other area of the damper shaft.
Ultimate RCT:
Proceed to step 7.
RockShox Dynamic Seal Grease
Select R
A
A
RockShox Dynamic Seal Grease
Select R
B
C
D
2
Loctite Threadlocker Blue 242
Ultimate RCT
B
A
Loctite Threadlocker Blue 242
RL, RT, Select R
B
A
