30
Disassembly - Damper Shaft, Eyelet, and Reservoir
RT, Select R:
Remove each reservoir bolt.
Remove the reservoir assembly from the eyelet.
Remove the alignment pin and reservoir o-ring.
Clean them and set them aside.
Clamp the damper shaft in a vise with RockShox Vise Blocks (3-hole)
(12.7 mm slot), threads down, just below the eyelet.
3 mm
RT
3 mm
Select R
RT
Select R
5
6
RockShox Vise Blocks (3-hole) - 12.7 mm slot
RockShox Vise Blocks (3-hole) - 12.7 mm slot
