7
Disassembly - Damper Shaft and Eyelet
D i s a s s e m b l y - D a m p e r S h a f t a n d E y e l e t
Remove the (A) bottom out bumper and washer, (B) travel reducer and
washer (if installed), and (C) Bottomless Token(s) (if installed). Clean and
set aside.
Ultimate RCT pictured
: Procedure is the same for all models.
To ensure correct disassembly and reassembly, the adjusters must be
adjusted accordingly before disassembly.
Ultimate RCT, RL, RT, Select R:
Confirm the rebound
adjuster knob is rotated full counter-clockwise to the full open position.
pictured:
Procedure is the same for all models.
Ultimate RCT:
Confirm the (A) compression adjuster is set to the zero/
center position. Rotate the (B) lever to the open/unlock position.
RL, RT:
Confirm the lever is rotated to the open/unlock
position.
1
A
B
C
2
A
B
