RoboVent Spire MLS-01-5500-10, Owner'S Manual

Page: 15 / 68

ROBOVENT • SPIRE SERIES OWNER’S MANUAL 15
FIGURE 8
SECTION 300
Features of the Spire Series Collector
5. Control Panel
The Modular Control panel contains all the com-
ponents that operate the Spire. Everything is
contained within the enclosure allowing the
controls to be mounted in various location configu-
rations on or near the Machine.
(see Figure 5).
6. Control Panel Screen (RV 3.1.3)
Robovent’s Control System controls the Blower
and Pulsing functions through an easy to
understand interface. Control the online and
offline pulse timing and trigger points; set filter
service alarms; setup automatic run schedules;
operate and control the blower speed manually
or automatically; monitor filter pressure and
see operation events. Watch the how-to video:
www.youtube.com/watch?v=pczwkJL2CyE&t=17s
(see Figure 6)
7. Sturdy 7 and 11 GA Reinforced
Collector Housing Construction
This heavy-duty construction secures a lifetime
of industrial use. Seams are welded and sealed
to assure there are no leaks or cracks that could
contaminate the facility air system.
8. Large Capacity Dust Tray
RoboVent Spire Series Collectors come standard
with a convenient Dust Tray (see Figure 7).
The Dust Tray is designed to capture and store
particulate pulsed off the filter cartridges and
minimize "re-entrainment." (Re-entrainment is the
term used for picking up dust that has already
been removed from the filter and re-depositing it
on the filter.)
9. Front Load System
Cartridge filters are easily accessible through
an oversized front door. The cartridge filters are
mounted on a robust filter yoke, and they are
secured with a threaded handle. This makes it easy
to change and replace filters. (See Figure 8)
FIGURE 5
FIGURE 7
FIGURE 6