RoboVent Spire MLS-01-5500-10, Owner'S Manual

Page: 17 / 68

ROBOVENT • SPIRE SERIES OWNER’S MANUAL 17
14. AutoSaver Auto On/Off (option)
The AutoSaver feature (if equipped) allows your
RoboVent Spire Series air filtration system to
rest when not needed, saving energy dollars.
This also allows the unit to enter off-line pulsing
mode to reduce filter loading if filter pressure is
above threshold limits. The AutoSaver turns the
system on when cutting, welding, or process
operations start and turns it off after the operation
is complete. (see Figure 12).
15. Supprex-200 Fire Suppression System
(option)
The Supprex-200 Fire Suppression System is
engineered to our exacting standards for safety
and effectiveness. The Supprex-200 is a two part
system that combines heat activated suppression
system and our safe sensor with intake dampers.
(see Figure 13).
If heat is detected, FM-200 gas (Figure 14) is
released to suppress the fire either directly at the
heat source through specialized heat sensitive
tubing, or indirectly into the cabinet through a
special discharge nozzle(s). With the Supprex-200
System there is little or minimal clean up after a
fire as it is a clean agent.
The effectiveness of this suppression system is
greatly enhanced with the safe sensor smoke
detection that is standard on all RoboVent Spire
collectors. Once smoke is detected, the unit goes
into an emergency alarm state, immediately
shutting off the blower and activating the
motorized dampers to a closed position. This
prevents air from continuing to flow through
the system and maximizes the hold time of the
FM-200 gas in the event the heat rises enough in
the cabinet to trigger its release. An optional ABC-
Dry Chemical suppression system is also available.
SECTION 300
Features of the Spire Series Collector
FIGURE 12
FIGURE 13
FIGURE 14