RoboVent Spire MLS-01-5500-10, Owner'S Manual

Page: 47 / 68

ROBOVENT • SPIRE SERIES OWNER’S MANUAL 47
SECTION 900
Maintenance
Motor Greasing
Motor bearing greasing frequency, type of lubrication
and amounts will vary depending on the type and size
of the motor in the unit. For more information, please
contact RoboVent Tech Support at (
1-888-762-6836
)
or email
customer.service@robovent.com
. Motor
manuals can be sent upon request. As a general rule,
RoboVent recommends greasing all motors over 20hp
once annually. (see Figures 45 and 46).
Fire Suppression Inspections
Dry Chemical: Monthly Inspection
Inspection by the owner or end user should verify the
following:
1. The Suppression Unit is in its proper location
as installed by the factory or factory certified
technicians.
2. The Manual Actuators are unobstructed.
3. The Suppression Unit shows no physical damage
or condition that might prevent operation.
a. This includes inspecting the detection tubing in
the hazard area for abrasion, distortion, cuts, or
dirt accumulation.
4. The Pressure Gauge is in the operable range. (see
Figure 47).
5. The Nozzle Blowoff Caps are intact and
undamaged. (see Figure 48).
6. Neither the Protected Equipment nor the Hazard
has been replaced, modified, or relocated.
FIGURE 45
FIGURE 46
FIGURE 47
FIGURE 48