RoboVent Spire MLS-01-5500-10, Owner'S Manual

Page: 8 / 68

8 ROBOVENT • SPIRE SERIES OWNER’S MANUAL
Failure to follow all instructions may result in electric
shock, bodily injury and/or destruction of the unit.
Use of controls, adjustments, or performance of
procedures other than those specified herein, may
result in electrical shock.
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions thoroughly.
2. Heed all warnings.
3. Do not block intake or exhaust vents. Keep the exhaust
vent free from debris and materials that could restrict
airflow. Prolonged restriction could damage the motor and
electrical components. Any blockage of the air flow will
decrease efficiency of this unit.
4. Refer all service matters to qualified service personnel.
Servicing is required when the unit is damaged in any
way including the control panel, supply wiring or in the
case of excessive filter loading.
5.
Disconnect power before working on the motor or
blower wheel. The motor or blower wheel should be
disassembled only by a factory authorized technician.
6.
Risk of serious personal injury or death!
Use extreme care to make sure you are never in a
position where your body (or any item you are in contact
with, such as a screwdriver or test instrument) can
accidentally touch the blower wheel.
7. If welding stainless steel, special safety measures need to be
followed when maintaining collector. Consult your Safety
Director for further information on
OSHA's Hexavalent
Chromium Standards.
SECTION 100
Important Safety Instructions