background image

V-038 Easy Guide

Please read these instructions carefully before using the Vax Detailer.
For advice or assistance, call

Vax Care

on

0870 606 1248

www.vax.co.uk

handheld vacuum for small spaces

PRODUCT FEATURES

On/off button

b

Filter inside dust container

c

Dust container

d

Charging indicator

e

Charging base

f

Brush attachment

g

Charger inlet

h

Charger

a

b

c

d

e

f

g

h

CHARGING

 

1. Remove the cleaner from the charging base.
2. Press the power button and hold down to vacuum dry dust and debris. Release to

shut cleaner off.

1. Grasp the dust container and remove by gently pulling away from the main body.
2. Pull the filter out and empty contents into a waste bin. Remove any extra debris

from the filter and then replace in the dust container.

3. To replace the filter, line up the 3 notches in the filter with the 3 tabs on the dust

container. Firmly press the filter into the dust container and check the alignment of
the filter. NOTE: Dust may escape through the vents if the filter is mis-aligned.

4. Re-attach the dust container.

1. Slide the brush attachment into the vacuum nozzle as needed. Remove when finished.
2. Store on charging base when not in use.

The Vax Detailer is designed to sit in the charging base on a flat surface or mounted
vertically on a wall.

HOW TO OPERATE

DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT

ATTACHMENT USAGE

CHARGING BASE/INSTALLATION

NOTE: Only use the C-038 charger supplied by Vax.

CHARGE FOR 24 HOURS BEFORE FIRST USE.

1. Connect charger unit to mains socket outlet.

2. Plug the charger into the charger inlet on the charging base, ensuring that the

 

dust 

container nozzle interlocks with the tab nearest the charging indicator.  Push the

handle down until it clicks securely into place. The charging indicator will light when 

the unit is charging. 

DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT

DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT

DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT

Reviews: