Roborock S6 Series Faq Download Page 7

Page: 7 / 67

Roborock Customer Service Center - Technical Support

22. Q: What should I do if the cleaner still clean the areas where invisible walls or

no-go zones have been set up? (Updated on September 29, 2018) .................... 35

23. Q: Is it necessary to buy physical barrier tapes if the no-go zone and invisible

wall function is enabled? (Updated on September 29, 2018) ............................... 36

24. Q: If I rearrange my furniture after saving a map, will the areas be automatically

cleaned and the map updated? (Updated on September 30, 2018) ..................... 36

25. Q: Why is the saved map reset? How can I restore it? (Updated on January 8,

2019)

................................................................................................................................... 36

26. Q: How do I schedule targeted room cleaning? (Updated on March 27, 2019)36

Phone-related.......................................................................................................... 37

1. Q: What should I do when Wi-Fi connection timeout always occurs? ............... 37

2. Q: What should I do when the machine frequently goes offline? ...................... 38

3. Q: What should I do when the machine cannot be found in the Mi Home app? 38

4. Q: What should I do when the machine displays an inaccurate battery

capacity? ............................................................................................................. 38

5. Q: Why does the direction of the map frequently change? ............................... 38

6. Q: What should I do when the map or path is askew? ..................................... 39

7. Q: How many times a day can schedule cleaning be set? ............................... 39

8. Q: What's the purpose of the DND (Do Not Disturb) mode? ............................. 39

9. Q: What's the purpose of the machine positioning feature? ............................. 39

10. Q: Is it normal when the path seems repetitive? ............................................. 39

11. Q: Are spot cleaning records not shown in the cleaning logs? ....................... 39

12. Q: How long can cleaning logs be retained? (Updated on January 3, 2019) .. 40

13. Q: Can notifications be blocked from the app? ............................................... 40

14. Q: Why is there a long delay when tapping a button in the app? .................... 40

15. Q: What should I do when firmware update fails/stops? ................................. 40

16. Q: Is multi-router roaming supported? ............................................................ 40

17. Q: Are Wi-Fi amplifiers/repeaters supported? ................................................ 40

18. Q: What's the 3G/4G traffic consumption for the mobile phone? .................... 40

19. Q: Can the machine be connected to several devices at a time? ................... 41

Summary of Contents for S6 Series




































































Search results

Summary of Contents for S6 Series

Reviews:

Related manuals for S6 Series

Brands by name

Popular brands

Roborock S6 Series, Faq

Search results

Summary of Contents for S6 Series

Reviews:

Related manuals for S6 Series

Brands by name

Popular brands