manualshive.com logo in svg

Roborock S6 Series, Faq

Share
Download
Roborock S6 Series Faq Download Page 39

Roborock Customer Service Center - Technical Support

 

 

39

 

 

6. Q: What should I do when the map or path is askew? 

A: The map of the robotic vacuum cleaner takes the environment near the starting point as a 

reference. If there are a few other things near the starting point, it may result in a poor frame of 

reference. In this case, please move the dock charger to an open area. 

7. Q: How many times a day can schedule cleaning be set? 

A: The machine supports up to 10 scheduled cleaning tasks a day. 

8. Q: What's the purpose of the DND (Do Not Disturb) mode? 

A: 

After the DND mode is enabled, if the machine automatically recharges due to low battery 

capacity,  the  machine  will  not  continue  cleaning  once  sufficiently  charged.

 All  passive  voice 

prompts (such as reporting an error) will be unavailable and the brightness of the light indicator 

will be reduced. The DNS mode will be disabled once the cleaning starts or there is any active 

operation (such as removing the dust bin). The machine will enter the DND mode again if it is 

left inactive for a certain period of time. This mode is enabled in the factory and is effective 

between 22:00-08:00 by default. It can be enabled or changed by using your mobile phone. 

9. Q: What's the purpose of the machine positioning feature? 

A:  From  your  mobile  phone,  when  you  tap  "Position  Machine",  the  machine  will  tell  you  its 

location via a voice prompt. When the machine reports an error from somewhere you cannot 

find, this feature is useful to quickly locate the machine. 

10. Q: Is it normal when the path seems repetitive? 

A: The map path indicated on your mobile phone may include some inter-area or intra-area 

movement that may be partially repetitive, in addition to normal cleaning. The machine will not 

carry out repeated cleaning. 

11. Q: Are spot cleaning records not shown in the cleaning logs? 

A: Spot cleaning records are not included in the cleaning logs. 

Summary of Contents for S6 Series




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands