Robland Z400 EL, Manual

Page: 6 / 72

6
V0119 Z400-serie
English Deutsch
Technical Data
Voltage 230V / 400V
Motor power 7 kW (S6) option 9,2 kW (S6)
Weight 890 kg (Z400M) - 1080 kg (Z400X3 3800)
Saw
Diameter saw and bore 300 - 400 x 30 mm
Cutting depth at 90° / 45° 125 mm / 90 mm
RPM 3000 / 4000 / 5000
Sawblade tilting 90° - 45°
Cutting width parallel fence 1000/1350/1525 mm
Cutting width parallel fence automatic 1250/1500 mm
Cutting length 3200 (option 2500, 3800) mm
dimensions cast iron table 985 x 710 mm
dimensions sliding table 3200 x 420 (option 2200, 3800) mm
dimensions cross-cut table 1420 x 650 mm
Length of cross-cut fence 2105 (telescopisch 3000 mm)
Scoring unit
Diameter saw blade and bore 120 x 20 mm
cutting depth with 120 mm diameter blade 3,5 mm
RPM 8200
scoring saw motor power 1,3 kW (S6)
Features
Diameter aspiration tubes 120 + 100 mm
Motorized rise and fall of the saw Option
Motorised tilting of saw aggregate option
Motorised and programmable parallel fence Z400 X1, X3
Numerically controlled height and tilt of saw Z400 X3
Mitre fence on sliding table option
Extra support table with rip fence option
Eccentric clamp option
Double sided mitre fence option
Automatic star-delta start standard
Digital read out on both flippers of cross cut fence option
Digital read out of tilt of the saw aggregate option Z400 EL
Digital read out of height of saw blade option Z400 EL
Digital read out on parallel fence option Z400 (EL)
Support roller option