Robland Z400 EL, Manual

Page: 3 / 72

Z400-serie V0119
3
English Deutsch
Danger list
This list was based on C-norms EN ISO 19085-5.
Mechanical risks caused by, for example:
-
the shape, the mass and the stability (potential energy of the elements), relative disposition,
the mass and speed (kinetic energy of the elements), insufficient mechanical resistance,
accumulation of potential energy of the elastic elements (springs), elements of the machine or
machined pieces
- Risk of crushing
- Risk of cuts
- Risk of gasping, wrapping
- Risk of electric shock or pinching
- Ejection of elements (of the machine or of the processed part), electrical risks, caused by
electrical contact (directly or indirectly)
- Risks caused by noise, materials or inhalation of toxic substances
- Risk of fire or explosion
- Combination of risks
- Risks caused by failure in the supply of energy, defect of elements of the machine and other
functional disorders, for example all types of safety devices, safety equipment and start / stop
equipment.
- Safety signals and pictograms and all types of information or equipment.
Operating instructions
The following recommendations for safe working procedures are given as an example, on top of all
information characteristic of this machine.
-
When working with the machine, safety equipment must be used.
- Nevertheless, the user must also follow the operating instructions to avoid accidents.
1 Training of machine users
It is absolutely essential that the panel saw user receives thorough training regarding operating and
adjusting the machine.
In particular:
a) the risks involved in working with the machine;
b) the operating principles, the correct usage and adjustment of the machine;
c) the correct choice of the tools for each operation;
d) the safe handling of parts to be processed;
e) the position of the hands in relation to the sawblade;
f) storing the workpieces safely before and after sawing them.
2 Stability
In order to be able to use the machine safely, it is essential to place it stably on the ground or other
stable surface.
3 Adjustment and installation
a) Disconnect the machine from the power supply before every adjustment.
b) The recommendations of the manufacturer must be followed when adjusting and installing the
tools.
c) The tools must be suited to the material being cut to assure safe and efficient sawing. The tools
must be correctly sharpened and installed.
4 Handling of tools
In order to avoid severe cuts, safety measures must be taken when handling the sawblades.
5 Intended use of the machine
The machine may only be used for processing all types of wood, panels and sheets with or without