Page 68
CABINET HEATER
10.3
Lighting Instructions (All Heaters)
10.3.1
To Turn the Heater On
a
.
Ensure the fuel supply to the heater is on, that all remote controls are set to ON .
Note:
The setting of the remote thermostat must be above ambient for the heater to operate.
b
.
Switch on the electrical supply at the isolator .
Note:
After long shut down periods the Control Box may go to lockout due to air in the burner head. Hence it may be
necessary to press the lockout reset button two or three times before a start is made. After lockout always wait one
minute before pressing the lockout reset button.
WARNING
IF THE HEATER DOES NOT OPERATE AFTER THE THIRD DEPRESSION OF THE LOCKOUT RESET,
DO NOT MAKE ANY FURTHER START ATTEMPTS UNTIL THE FAULT HAS BEEN TRACED AND
CORRECTED BY A COMPETENT ENGINEER.
FOR OIL FIRED HEATERS, UNBURNED RESIDUAL OIL IN THE COMBUSTION CHAMBER
IS AN EXPLOSION RISK.
10.3.2
To Turn the Heater Off
10.3.2.1 (Short Periods)
a
.
Turn Off the remote controls fitted on site or turn down the setting of the remote thermostat so that
it is below ambient temperature..
b
.
To restart, move the control used above to its normal position.
10.3.2.2 (Long Periods)
a
.
Carry out the operation of 10.3.2.1 above.
b
.
When the main fan(s) have stopped automatically, turn off the fuel supply valve.
c
.
Turn off the main electrical isolator.
10.3.3
To Restart After Long Shut Off Period
a
.
Open the fuel supply valve.
b
.
Carry out operation from 10.3.1.
Summary of Contents for Combat HF 30 v4
