Home
/
Robe
/
Digital Spot 3000 DT II
/
User Manual

Robe Digital Spot 3000 DT II, User Manual, Page: 92 / 124

Share

Page: 92 / 124

Robe Digital Spot 3000 DT II User Manual Download Page 92

DigitalSpot 3000 DT II

92

31.8 Cleaning

Turn the power off and disconnect the fixture from the mains. before starting cleaning procedure.
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up
on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will not
only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances should
alcohol or solvents be used!

DANGER !

Disconnect from the mains before starting any

cleaning and maintenance work

The front covering glasses will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light output very quickly.
The cooling fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized dealers.

Cleaning a projection lens of the projector.

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. Lightly wipe a cleaning cloth over
projection lens.

Specifications are subject to change without notice.

January 21, 2013

«
...
90
91
92
93
94
...
»

Summary of Contents for Digital Spot 3000 DT II





























































































































Reviews:

No comments