DigitalSpot 3000 DT II
68
26. Projection onto angular, cylindric or spheric surfaces
If a projection on curved surface is required a correction of the shape distortions is necessary. The DigitalSpot 3000
DT II supports projection onto angular screens, cylinders and spheres.
26.1 Curved surface support channels
Global effect 2
This channel enables you to select desired shape of the surface:
To simplify a correction process, there is a gobo with a net pattern (DMX value = 2) in a factory folder No. 20
(DMX value= 20) on a
Gobo folder selection
channel each gobo layer.
Global effect 2- parameter 1
This parameter enables to adjust the total length of the image edge. A value of 0 means no adjustment, a value of
255 means maximum correction.
Note. If a corner projection is selected on a
Global effect 1
(values of 1-4), the red guiding line will appear in the
image (the gobo with the net pattern has to be projected).
Guiding line
Summary of Contents for Digital Spot 3000 DT II
Page 1: ...Version 1 3 ...