DigitalSpot 3000 DT II
23
Verbose Mode
--- Use this menu to hide messages displayed on the screen when you are changing some setting
on the
Power/Special functions
channel (e.g. Rear projection on, Rear projection off.....) .
Verbose Mode 0
--- Generated messages are hidden.
Verbose Mode I
--- Generated messages are visible on the projection screen.
DMX Verbose Mode
--- It displayes information regards picture at the bottom left corner of
the image (channel, name, DMX value):
Synchro Verbose Mode
--- used for debugging of video synchronization.
Default Settings
--- Select this option to set default values or to remove user´s content in the fixture.
Set Default Values
--- Select this option to reset all fixture personalities to the default values.
Remove User Media Content
--- The item deletes all user media contents except the factory media
content.
15.4 Lamp On/Off
Use this option in order to switch on/off the projector´s lamp.Do not use the projector continuously for 24 hours or
more. If using the projector continuously for long periods, turn it off and leave it for one hour at least once during a
24 hour period.
15.5 Manual control
Manual DMX control ---
Select this menu to control all channels by the control elements on the control board.
Video Input Selection ---
This menu enables to select desired video input:
Internal input
External SVIDEO Input
15.6 Stand-alone setting
Use this menu to set options for a stand-alone mode as a selection of the playing program, programming and
modifying current programs.
Play program
--- Select this menu to run a built-in program or 10 freely-programmable programs
in a loop.
Test Program In Loop
--- The option starts built-in test program.
Program 1 In Loop
:
These options start user defined programs
Program 10 In Loop
Every program can run in two modes:
Norma
l - This mode uses pan/tilt movement and therefore is good
for a dynamic projection.
Summary of Contents for Digital Spot 3000 DT II
Page 1: ...Version 1 3 ...