Robe Digital Spot 3000 DT II, User Manual, Page: 25 / 124

DigitalSpot 3000 DT II
25
Note: If you select the program which contains previously recorded data, the data will be overwritten without
warning.
Preset playback --- The menu allows to select a program (or a DMX program), which will be played automatically in
a loop after switching the fixture on.
Fixture Off Timer --- The menu offers to control the time during which the fixture is on and, for example, plays the
recorded program. The adjusted time period is counted from starting the fixture.
Timer Deactivated --- The item disables the “Fixture Off Timer” option.
Timer Activated --- Activate timer is signalled by the small icons at the top right corner of the screen.
Set Timer Hours --- The item enables to set hours for the “Fixture Off Timer”.
Set Timer Minutes --- The item enables to set minutes for the “Fixture Off Timer”.
15.7 Preview mode.
This item enables to display the image, going from the projector, on the fixture´s display.
Note: If this function is called out ,the video sequence from projector will not be played continuously because the
fixture´s processor has to display this sequence twice at the same time ( on the wall and on the display)
15.8 Reset functions
The DigitalSpot 3000 DT II can be reset totally or in function modules. Select a desired function to run a reset:
Reset Graphics Engine --- This function resets a graphics engine.
Reset Pan/Tilt System --- This function resets a pan/tilt movement.
Reset Focus/Shutter system --- This function resets a focus module.
Reset All systems --- This function enables you to return all fixture´s effects to their standard positions.
15.9 Service menu
Use this menu to read useful information about the fixture.
Power On Time - Select this submenu to read the number of operation hours of the fixture.
Total Hours - The function shows the total number of the operation hours since
the DigitalSpot 3500 has been fabricated.
Resetable Hours - The function shows the number of the operation hours that
the DigitalSpot 3500 has been powered on since the counter was last reset. In order
to reset this counter to 0, press [ENTER] twice.
Lamp On Time - Select this submenu to read the number of the operation hours with the projector lamp on.
Total Hours - The function shows the total number of the operation hours with the lamp
on since the DigitalSpot 3500 has been fabricated.
Resetable Hours - The function shows the number of the operation hours with the
lamp on that the DigitalSpot 3500 has been powered on since the counter was last reset.
In order to reset this counter to 0, press [ENTER] twice.
Lamp Strikes - Select this submenu to read the total number of the projector lamp strikes.
Total Hours - The function shows the total number of the lamp strikes since
the DigitalSpot 3500 has been fabricated.
Resetable Hours
- The function shows the number of the lamp strikes since
the counter was last reset. In order to reset this counter to 0, press [ENTER] twice.
Fixture Temperatures --- Select this submenu to read the temperatures of the projector:
Current - Select this function to read the current temperatures of the fixture interior .
Maximum nonresetable -The function shows the max. temperatures of the fixture interior
since the DigitalSpot 3000 DT II has been fabricated.
Maximum resetable - The function shows the maximum temperatures of the fixture interior