DigitalSpot 3000 DT II
28
after updating, run update of the hardware functions.
Update HW processors Software
- starts update of hardware functions like pan, tilt,
focus...etc.
Update Media Content
- starts update of the factory media folders 00-20 (pictures, videos)
Calibrate Values
--- This menu serves for a fine calibration of effects.
Analog Shutter
- allows ine calibration of a mechanical shutter (projector lamp has to be
turned on).
Tilt Calibration
-allows fine calibration of a tilt.
Generate Log File
--- This item starts generating a log file. The file is saved in a folder "Log" on the hard disk.
This file records events in a certain scope in order to provide an audit trail that can be used to diagnose problems
of the fixture.
Remote servis
--- This menu provides necessary items for remote servis of the DigitalSpot 3000 DT II.
15.11 Fixture Off
This function shuts down the fixture. The projector lamp is switched off as first and after cca 20 seconds is switched
off the fixture.
16. Keystones
16.1 Global keystone parameters
If an image is output from the DigitalSpot 3000 DT II at an angle the image may be skewed. Eight keystone channels
(
KeyStone Top Left X, KeyStone Top Left Y, KeyStone Top Right X, KeyStone Top Right Y, KeyStone Bottom Right X,
KeyStone Bottom Right Y, KeyStone Bottom Left X, KeyStone Bottom Left Y)
adjust the image shape.It is possible to
control each of the four corners of the image and reshape it.
Default DMX value is 0, it means that no keystone correction has been used.
Setting all keystone values to 0 will place all four corners of the image at the four corners of the projector output.
The keystone values can also be used to create interesting skewing effects.
For the picture merging are important both the
KeyStone X-ratio
and
KeyStoneY-ratio
channels for correction of
the image distortion caused by placing projectors at different distances from the final image:
Summary of Contents for Digital Spot 3000 DT II
Page 1: ...Version 1 3 ...