DigitalSpot 3000 DT II
9
--->"Ceiling Projection"--->"On")
Note that a special rear projection screen is required.
When determining the position of the fixture and projection screen, you will need to account for the projected
image size, which is directly proportional to the projection distance.
There is a chart of throw distance ratio of 1.93-2.16 : 1 to assist you in determining the ideal location for your
fixture.
Min zoom is default setting
.
Max. zoom is possible after manual adjustment only. See instructions below
.
Note:
There is a tolerance among these numbers due to optical component variations. We recommend that if you
intend to permanently install the DigitalSpot 3000 DT II, you should physically test the projection size and distance
using the actual fixture in m before you permanently install it, so as to make allowance for this projector's optical
Summary of Contents for Digital Spot 3000 DT II
Page 1: ...Version 1 3 ...