3.
THE CONTROLS
3.1
USING THE CONTROLS
“+” / ^ BUTTON
* This button is used to increase the value by one increment when adjusting a parameter
(battery type, cell count etc.), and also to select the next menu within the menu system.
The button features an auto-repeat function, i.e. holding it pressed in has the same effect
as pressing it repeatedly.
“-” / v BUTTON
* This button is used to decrease the value by one increment when adjusting a parame-
ter (battery type, cell count etc.), and also to select the previous menu within the menu
system. The button features an auto-repeat function, i.e. holding it pressed in has the
same effect as pressing it repeatedly.
SELECT wHEEL
Rotating the Select Wheel to left or right emulates the functions of the “+” / “-” buttons.
ENTER BUTTON
* The ‘ENTER’ button is used to confirm a menu point you have just selected, e.g. acti-
vating a selected sub-menu, or accepting a previously set value. Pressing this button also
returns you to the main menu.
MODE BUTTON
* A single press starts a charge process;
a double press starts a discharge process; and
a triple press starts a discharge / charge process (cycle charging). The selected process
can be stopped at any time by pressing this button again.
INTEGRAL SOUNDER
* The piezo buzzer sounds to confirm each button-press, alerts you when a charge or dis-
charge process is completed, and also warns you of any error which occurs.
Operating Instructions
Duo-Power 8S EQ
No.
8504
8
Screen
ENTER
button
BID socket
Power
supply
Battery
sockets
Voltage sensor
socket
“-” / v button
Select wheel
“+”/^button
MODE
button
