2 Encoder ENCO 08 and ENCO 08-M
Manual ENCO 08-M · EN05 · 2018, September 10th
18
2.4.2
ENCO 08-M
External encoder for mounting on mechanical counters with mechanical output
according to EN12261.
This version requires on-site parameterization, unless the ENCO08-M is already
mounted and sealed in a totalizer head with mechanical output.
The ENCO 08-M is parameterized with its specific data (such as meter reading,
number of decimals and direction of rotation) by means of a PC operating program
to the meter type to which it is attached.
With the ENCO 08 firmware (1.11 and 1.12), turbine and rotary displacement
meters can be operated with the following combinations of output value (Ua) and
number of decimals (NKS
–
N
ach
k
omma
s
tellen, German):
Coupling for output shaft
Coupling connection
