1 Introduction
Manual ENCO 08-M · EN05 · 2018, September 10th
12
Danger
Risk of destruction by body electricity, e.g. due to friction of clothing -
appropriate protective clothing must be worn.
Notice
During installation, it must be ensured that the enclosure protection class
is observed. Direct sunlight must be avoided.
The encoder housing complies with protection class IP20 due to EN 60529 and is
installed in a totalizer housing (e.g. totalizer head G) or an aluminum housing
(ENCO 08-M) with a protection class of IP66 + IP67.
Temperature ranges
MID:
-25°C to +55°C
(ambient Temperature, custody transfer)
ATEX:
-40°C to +57°C
(T6)
Notice
In case of doubt, the limited range of the MID applies: -25°C to +55°C
1.3.2
Junction boxes with enhanced safety
Danger
When connecting the device electrically, make sure that the power supply
is correct (see data on the type plate).
