1 Introduction
Manual ENCO 08-M · EN05 · 2018, September 10th
11
1.2.9
Dispose of packaging material
Dispose the packing material in an environmentally friendly way in accordance to
the national standards.
1.2.10
Storage
Avoid long periods of storage. Check the Encoder ENCO 08 after any storage for
damage and functionality. Ask for a check from the RMG service after a storage
period for the device of over one year. In this case please send back the device to
RMG.
Nevertheless, if storage is necessary, the following must be observed:
•
A dry, frost-free environment is required for storage.
•
Installation and commissioning must be carried out exclusively by qualified
personnel
1.3
Explosion-proof design
1.3.1
General information
Danger
The encoder ENCO 08 may be installed in hazardous areas in zone 1, as long
as only gases and vapors are present which are assigned to explosion group
IIC and temperature class T6.
ATEX
– Approval number: BVS 15 ATEX E 041 X
Indication:
II 2G Ex ib IIC T6
The device complies with the regulations of Directive 94/9/EC.
The applicable regulations must always be observed during installation and
operation. The permitted electrical data can be found in chapter
3.3 Electrical
connections.
