1 Introduction
Manual ENCO 08-M · EN05 · 2018, September 10th
7
Caution
If the unit is not cleaned in accordance with the operating instructions, the
device may be damaged. Clean the unit only in accordance with the
operating instructions.
Clean with a damp cloth!
Danger
The Encoder ENCO 08 may only be used as intended!
(chapter 2 Encoder ENCO 08 and ENCO 08-M).
Avoid any use of the Encoder ENCO 08 as possible climbing aid or
attachments of Encoder ENCO 08 as possible handholds!
1.2.4.4
Qualification of personnel
Persons working with or on the device must have the following knowledge:
•
Training / education for working in potentially explosive environments.
•
The ability to correctly assess dangers and risks when using the ENCO 08
encoder and all connected devices. Possible hazards include components
under pressure or the consequences of incorrect installation.
•
Possible dangers are, e.g., components under pressure or the result of
incorrect installation.
•
Recognize dangers that could be caused by the used flow medium.
•
Training / education by RMG for working with gas measuring instruments.
•
Education / instruction in all country-specific standards and directives to be
observed for work that is to be carried out on the device.
1.2.5
Risk assessment and mitigation
The TRZ03 subjects to risks in its use, which were judged by qualified staff of the
company RMG. Risks can arise, for example, from work outside the permissible
temperature range. Illegal current and voltage values can cause explosions in
hazardous areas. Of course only work by trained personnel (
chapter 1.2.4.4
Qualification of personnel
) are permitted, which is also trained to know proper
tools and use only this.