3 Connection and commissioning
Manual ENCO 08-M · EN05 · 2018, September 10th
29
mounted on all manufacturer-independent turbine and rotary displacement gas
meters with mechanical output and a maximum of 9-digit roller counter, whereby
for 8 rollers, the last scale division corresponds to the 9th digit.
The ENCO 08 programming module and the PC-ENCO user program (software)
are required for parameter setting. This separate quick guide can be found in the
help menu of the "ENCO08 PC Software".
When putting into operation on site, the connection (see connection examples)
between ENCO 08-M and the connected readout device must still be established
after the programming has been completed. On the housing side there is the
connection for the encoder (plug from the company Binder of series 713).
