4. MOUNTING
IMSRM02-E6
59
4.6 Removing the Module Mainframe
It detaches the module from the mother block that is mounted on DIN rail or a panel.
To separate the module mainframe from the mother block, press the bottom on the module, lifting
upward, to release connection.
The above figure is a figure of double type module, and so it is in case of single type
module.
4.7 Terminal Covers
Terminal covers snap on to protect the module terminals. These covers can be permanently secured to
the module using a 3
×
8 mm self-tapping round head, taper thread screw. (Customer must provide
screws)
3
×
8 mm self-tapping round head,
taper thread screw
Terminal cover
Pre-drilled hole for a
permanently securing
terminal cover
Mother block
Module mainframe
Upper
section
Mother block
Module mainframe
Lower
section
Press bottom of module
and lift upward to release
