1. OUTLINE
IMSRM02-E6
11
DI module (Digital input module) model code
(1) Type
A:
24 V DC 8 points input type (4 points/common)
If the type A without the memory area selection input terminal is requested, the special
model code of “Z-186” is added to the end of PCP module model code.
DO module (Digital output module) model code
(1) Type
A:
8 points output type
B:
4 points output type (Open collector output can not be selected.)
(2) Output signal
M:
Relay contact output (Type A: 4 points/common, Type B: Independent common)
D:
Open collector output (8 points/common)
Initial Code Table
DO function can be allocated by the customer through operation panel. But those who do not have
operation panel are necessary to add this settings to the customer's host communication program.
-
Block 2 (Lower 4 points of terminal)
Block 1 (Upper 4 points of terminal)
-
N
Block 1 (All points of terminal)
Above initial codes are for DO-A and DO-B type module.
M-DI-
(1)
H-DO-
-
(1)
(2)
DO-A
DO-B
DO module function allocation
code list
N:
Unused
1:
Temperature first alarm
2:
Temperature second alarm
3:
Heater break alarm
4:
Burnout alarm
7:
Loop break alarm
