RiTTO TWINBUS, System Manual

Page: 71 / 197

Installation: Assembly, connection and start-up
71
In
st
al
la
tio
n
Menu control
Start-up menu
Use the start-up menu to perform start-up and adjust the settings.
Open the start-up menu.
Menu item "Basic settings"
Menu item "Bell buttons"
Button Function
Control keys
Use the control keys to move within the menu structure. The selected menu item is highlighted
by the symbol ">" at the beginning of the line.
Use control key "<" to exit the menu item.
The possible moving directions on the display change depending on the menu item.
Selection key
Use the selection key to activate the menu item highlighted by ">."
A new menu with additional selection options may open depending on the menu item.
Starting up
Basic settings
Bell buttons
Special key
Comfort buttons
Switching contact
Internal call
Rights
Factory settings
Info
Exit
Basic settings
Set language
Terminal resistor
Call differentiation
Back
Menu item Setting options
Set language Selection of menu language
Factory setting: German
Terminal resistor On/off
Factory setting: Off
Call differentiation On/off
Factory setting: On
Note:
To signal calls from several main doors or from an apartment button with the same call tone, select
"OFF" from the menu item "Call differentiation."
Basic settings
Program bell buttons