RiTTO TWINBUS, System Manual

Page: 154 / 197

Inst
alla
tion
Installation: Assembly, connection and start-up
154
* The access module displays the existing memory locations in ascending order, starting with memory location “0”. After several
increments of 1 the access module continues to count in steps of 10. If the card is removed from the access module surveillance
area the counting stops. If the card is immediately moved back into the surveillance area the access module continues counting
in increments of 1.
* The access module displays the existing memory locations in ascending order, starting with memory location “0”. After several
increments of 1 the access module continues to count in steps of 10. If the card is removed from the access module surveillance
area the counting stops. If the card is immediately moved back into the surveillance area the access module continues counting
in increments of 1.
Activity Result
Create second master card
Activity Result
Master
*
Hold master card up in front of the access
module until
the desired memory location is displayed
Remove master card
! I
Memory location no. illuminates for 3 s
# I
and starts flashing for 5 s
Master
hold the master card up in front of the
access module while the number is
flashing
Identity card is blocked,
memory location is counted up
Master
*
Hold master card up in front of the access
module until
is displayed
Remove master card
! I
illuminates for 3 s
# I
and starts flashing for 5 s
hold the access card to be created up in front of
the access module while the number if flashing
Second master card has been
created