Advanced Operations 8
Switched Power Distribution Unit
71
EN
Setting the SMTP server address:
The Set Email Host command sets the IP address
or hostname of the SMTP server.
To set the SMTP server address:
At the Switched PDU: prompt, type set email
smtp host, followed by the SMTP server’s IP
address or hostname and press Enter.
Examples
The following command sets the SMTP server
address to 55.55.55.55:
Switched PDU: set email smtp
55.55.55.55<Enter>
The following command sets the SMTP server
address to email.rittal.com:
Switched PDU: set email smtp
email.rittal.com<Enter>
Changing the SMTP server port:
With SMTP support enabled, the PDU sends
SMTP requests to the default SMTP port number
25. This port number may be changed using the
Set Email SMTP Port command.
To change the TACACS port:
At the Switched PDU: prompt, type set email
smtp port, followed by the port number and press
Enter.
Example
The following changes the SMTP port number to
5555:
Switched PDU: set email smtp port 5555<Enter>
Setting the ‘From’ email address:
The Set Email From command sets the ‘from’
email address. By default, this is set to ‘PDU3_’
plus the last three octets of the unit’s MAC ad-
dress. Example: ‘PDU3_510c90@’
To set the ‘From’ email address:
At the Switched PDU: prompt, type set email
from, followed by the originating email address
and press Enter.
Example
The following command sets the ‘from’ email ad-
dress to
Rack14PDU1@rittal.
de:
Switched PDU: set email from
[email protected]<Enter>
Setting the ‘To’ email address:
The Set Email PrimaryTo and Set Email Secon-
daryTo commands set the recipient email ad-
dresses.
To set the ‘To’ email address:
At the Switched PDU: prompt, type set email,
followed by primaryto or secondaryto and the
destination email address. Press Enter.
Examples
The following command sets the primary ‘to’ email
address to [email protected]:
Switched PDU: set email primaryto DayAd-
[email protected]<Enter>
The following command sets the secondary ‘to’
email address to [email protected]:
Switched PDU: set email secondaryto
[email protected]<Enter
>
Enabling or disabling event notification types:
The Set Email Event, Set Email Auth, Set Email
Power and Set Email Config commands enable or
disable email notification of the event types as
described.
To enable or disable event notification types:
At the Switched PDU: prompt, type set email,
followed by event, auth, power or config and
enabled or disabled. Press Enter.
Examples
The following command sets the enables email
notification general system events:
Switched PDU: set email event enabled<Enter>
The following command sets the disables email
notification authentications attempts:
Switched PDU: set email auth disable<Enter>
