Operations 7
Switched Power Distribution Unit
13
EN
7.2.1 Logging In
Logging in through HTML requires directing the
HTML client to the configured IP address of the
unit.
To log in by HTML:
In the login window, enter a valid username and
password and press OK.
If you enter an invalid username or password, you
will be prompted again.
You are given three attempts to enter a valid
username and password combination. If all three
fail, the session ends and a protected page will be
displayed.
Note!
The default PDU username/password
is admn/admn
Outlet Control
The Outlet Control section offers access to the
Individual and Group outlet control pages. From
the Individual and Group pages, the user can
review and manipulate power control functions for
all outlets and groups assigned to the current
user. Both pages include the outlet’s absolute
and descriptive names, the Outlet Status reported
to the PDU by the outlet, the current Control State
being applied by the PDU, and the outlet load in
amperes.
Available outlet and group power states may be
set to on, off or reboot.
Individual
The Individual outlet control page displays all
outlets assigned to the current user. The user
may apply on, off or reboot actions to individual,
multiple or all-accessible outlets.
To apply actions to individual or multiple out-
lets:
In the Individual Outlet Control section, select the
desired action from the Control Action drop-down
menu for each individual outlet to be changed,
and press Apply.
To apply an action to all outlets:
In the Global Control section, select the desired
action from the Control Action drop-down menu
and press Apply.
Group
The Group outlet control page displays all groups
assigned to the current user, as well as the out-
lets for each group.
To select a group:
Select the group name from the drop-down menu
and press Select. The page will refresh to dis-
play all outlets associated to the selected group
name.
To apply an action to a group:
Select the desired action from the drop-down
menu and press Apply.
7.2.2 Power Monitoring
Input Feeds
The Input Feeds page displays:
•
Infeed’s absolute and descriptive names
•
Infeed status
•
Input/branch phase load in amperes
•
Input Voltage
•
Calculated power usage in Watts.
This page will refresh automatically every 10 sec-
onds.
System
The System page displays:
•
Calculated power usage for ALL infeeds
in Watts
•
Configured total system area in square
feet or square meters.
•
Calculated power usage in Watts/square
foot or square meters.
This page will refresh automatically every 10 sec-
onds.
UPS
The UPS page displays the following information
for each UPS device associated with the PDU:
•
Type
•
Status
•
Voltage
•
Hostname/IP address
This page will refresh automatically every 10 seconds.
