Operations 7
44
Switched Power Distribution Unit
EN
Examples
The following command sets the FTP host IP
address to 12.34.56.99:
Switched PDU: set ftp host 12.34.56.99<Enter>
The following command sets the FTP hostname
to
ftp.rittal.com
:
Switched PDU: set ftp host
ftp.rittal.com<Enter
>
Setting the FTP username:
The Set FTP Username command sets the user-
name as required by the FTP Host.
To set the FTP username:
At the Switched PDU: prompt, type set ftp user-
name, followed by the FTP username and press
Enter.
Example
The following command sets the FTP username
to Guest:
Switched PDU: set ftp username guest<Enter>
Setting the FTP Password:
The Set FTP Password command sets the pass-
word as required by the FTP Host.
To set the FTP password:
At the Switched PDU: prompt, type set ftp pass-
word, followed by the FTP password and press
Enter.
Example
The following command sets the FTP password to
OpenSesame:
Switched PDU: set ftp password OpenS-
esame<Enter>
Setting the filename to be uploaded:
The Set FTP Filename command sets the file-
name of the firmware file to be uploaded.
To set the FTP filename:
At the Switched PDU: prompt, type set ftp file-
name, followed by the firmware filename and
press Enter.
Example
The following command sets the FTP filename to
snb_s50a.bin:
Switched PDU: set ftp filename
snb_s50a.bin<Enter>
Setting the directory for the file to be up-
loaded:
The Set FTP Directory or Set FTP Filepath com-
mands set the directory for the firmware file to be
uploaded.
To set the FTP directory:
At the PDU: prompt, type set ftp directory, fol-
lowed by the directory and press Enter.
Or, type set ftp filepath, followed by the directory
and press Enter
Example
The following command sets the FTP directory to
ftp://PDU:
PDU: set ftp directory ftp://PDU<Enter>
Enabling or disabling automatic updates:
The Set FTP Autoupdate command is used to
enable or disable automatic firmware update sup-
port.
To enable or disable automatic updates:
At the Switched PDU: prompt, type set ftp aut-
oupdate, followed by enabled or disabled and
press Enter.
Setting the automatic update scheduled day:
The Set FTP Autoupdate Day command is used
to set the day when automatic updates occur.
To set the automatic update day:
At the Switched PDU: prompt, type set ftp aut-
oupdate day, followed by a day of the week or
everyday and press Enter.
