Rittal CMC-TC Master II, Instruction Manual

Page: 9 / 34

Operation 7
CMC-TC Master II
9
EN
Fig. 13 HyperTerminal start window
Once you have been able to establish the connec-
tion to the CMC-TC Master II, the CMC-TC Master II
start window appears.
Press the ESC key to reach the CMC-TC Master II
configuration menu.
7 Operation
7.1 Becoming familiar with the menu
structure
The menu structure of the terminal program has the
following form:
1 Network Configuration
1.1 IP Configuration 1.3 SNMPv1 Access
1.1.1 IP Address 1.4 Enable TFTP
1.1.2 IP Subnet Mask 1.5 Read Community
1.1.3 IP Def. Gateway 1.6 Write Community
1.2 Trap Receiver Configuration 1.7 System Name
1.2.1 IP Trap Receiver 1.8 System Contact
1.2.2 Disable 1.9 System Location
1.2.3 IP Trap Receiver 1.A Change User Passwords
1.2.4 Disable 1.A.1 Password of User ´cmc´
1.2.5 IP Trap Receiver 1.A.2 Password of User
´admin´
1.2.6 Disable 1.B Telnet Timeout Minutes
1.2.7 IP Trap Receiver 1.C Enable/Close Telnet
1.2.8 Disable 1.G Activate Actual Values
2 IP Addresses of Devices
2.1 IP Address of Device 1 2.6 IP Address of Device 6
2.2 IP Address of Device 2 2.7 IP Address of Device 7
2.3 IP Address of Device 3 2.8 IP Address of Device 8
2.4 IP Address of Device 4 2.9 IP Address of Device 9
2.5 IP Address of Device 5 2.A IP Address of Device 10
3 Setup of connected devices
3.1 Name of the found unit 3.6 Name of the found unit
3.2 Name of the found unit 3.7 Name of the found unit
3.3 Name of the found unit 3.8 Name of the found unit
3.4 Name of the found unit 3.9 Name of the found unit
3.5 Name of the found unit 3.A Name of the found unit
Fig. 14 Menu structure
7.2 Operating notes
The following sections list as tables all the configu-
ration parameters of the CMC-TC. The basic opera-
tion is always the same:
•
Use the "up"
Ĺ
and "down"
Ļ
arrow keys to navi-
gate within the menu structure.
•
Use the "left"
ĸ
and "right"
ĺ
arrow keys to scroll
within fields that have several default values.
•
Enter from the keyboard any required data in
fields for text or numeric information.
•
The "Esc" key can be used to cancel your inputs.
•
Press "Return" or "Enter" to confirm all inputs.