Rittal CMC-TC Master II, Instruction Manual

Page: 21 / 34

Operation 7
CMC-TC Master II
21
EN
Navigation
Alarms – Alarm condition – Alarm notification
Alarm actions
Parameter Explanation
No action se-
lected Select an alarm action from the
pulldown menu.
Add another
action Select this button when an ad-
ditional alarm action is to be
performed.
Save settings Click the "Save settings" button
to save the setting.
Cancel Click the “Cancel” button to
clear the alarm action.
To change the conditions, proceed as follows:
1
Fig. 34 Overview of the new alarm condition
Key
1 Alarm condition overview
As Figure 35 shows, the new alarm condition is now
shown in the overview. If you want to correct or
delete this alarm condition, you see on the right-
hand side of the alarm condition various links in the
alarm conditions overview. Proceed as follows:
Navigation
Alarms
Parameter Explanation
Name: "delete"
link Click this link to delete the con-
dition.
Condition:
"change" link Click this link to change the
sensor or the sensors.
Notification:
"change" link Click this link to change the
notifications.
Action: "chan-
ge" link Click this link to change the
performed action.
7.7 Configuring the Webcam images
To display, download or delete recorded images,
proceed as follows:
1
Fig. 35 Webcam images overview
Key
1 Configure the saved Webcam images
Navigation
Images – Images Actions
Parameter Explanation
Time range Specify in which time window
you want to see, download or
delete the images.
Images type Specify whether you want to
see the regularly saved or the
images for alarms.
Webcam to
use Select whether you want to see
only the images of Webcam 1
or 2 or the images of both
Webcams at the same time.
Show images View all images stored on the
CMC-TC Master II hard disk.
Download
images Download the images not con-
tained in an archive.
Delete images Delete the images not con-
tained in an archive.