Rittal CMC-TC Master II, Instruction Manual

Page: 16 / 34

7 Operation
CMC-TC Master II
16
EN
Note!
To save the settings, you must click the
Change Configuration button.
Navigation
Admin – Alarm notification receiver – E-mail ser-
ver configuration
Parameter Explanation
SMTP Server
IP Enter the IP address of the e-
mail server.
Note!
To save the settings, you must click the
Change E-mail Server Configuration but-
ton.
Navigation
Admin – Alarm notification receiver – E-mail re-
ceiver configuration
Parameter Explanation
E-mail address
1 - 4 Enter the e-mail address of the
recipient. If this recipient is to
receive e-mails, activate the
Enable checkbox.
Note!
To save the settings, you must click the
Change E-mail Server Configuration but-
ton.
Navigation
Admin – Alarm notification receiver – Windows
popup message receiver configuration
Parameter Explanation
IP Address
1 - 4 Enter the IP address of the
recipient who in the case of an
alarm is to receive a popup
window. If this recipient is to
receive a popup window, acti-
vate the Enable checkbox.
Note!
To save the settings, you must click the
Change Configuration button.
7.5.4 Settings for a shutdown
You can shutdown the computer should an alarm be
issued.
1
Fig. 23 Remote shutdown setup
Key
1 Configuration window for a shutdown
Navigation
Admin – Remote Shutdown Settings – Create
New Shutdown Setting
Parameter Explanation
Shutdown type Select whether the computer
has Windows or a Linux as
operating system.
Description Enter a description of the shut-
down.
IP address Enter the IP address of the
computer to be shutdown.
, Enter the user name of the
person logged in on the com-
puter.
User password Enter the password of the com-
puter for which you have en-
tered the user name.
Domain name Enter the domain in which the
computer is located.
Delay time Enter a delay time (in seconds)
after which the computer should
be shutdown after the Shut-
down command has been en-
tered.
Message Enter a message to be dis-
played in the popup window
when the computer is shut-
down.
Force closing
of applications If running programs should be
closed when a Shutdown com-
mand is issued, activate the
checkbox.