Operation
7
CMC-TC Master II
11
EN
7.3.6 Configuring system name,
contact and location
A unique name, a contact address (e-mail) and a
location can be entered for the CMC-TC Master II.
Navigation
Main menu – 7 System Name / 8 System Contact
/ 9 System Location
Parameter
Explanation
7 System Na-
me
The CMC-TC Master II can be
given any name. Press the
Backspace key to clear the
factory setting and enter the
new name.
8 System Con-
tact
Set the contact address (e.g.
[email protected]). Press the Back-
space key to clear the factory
setting and enter the new
name.
9 System Lo-
cation
Enter the name of the installa-
tion location. Press the Back-
space key to clear the factory
setting and enter the new
name.
7.3.7 Configuring passwords
You can change the passwords of the CMC-TC
Master II as required. The string length must not
exceed 20 characters. Special characters are not
permitted.
Navigation
Main menu – A Change User Passwords
Parameter
Explanation
1 Password of
User ´cmc´
Set the password for the ´cmc´
user (max. 20 characters).
Press the Backspace key to
clear the factory setting and
enter the new password.
2 Password of
User ´admin´
Set the password for the
´admin´ user (max. 20 charac-
ters). Press the Backspace key
to clear the factory setting and
enter the new password.
7.3.8 Configuring the timeout window
The Telnet Timeout window is used for the auto-
matic logout after a defined time. If, for example, a
user has not performed any action on the CMC-TC
Master II over a period of five minutes, the user will
be logged off automatically.
Navigation
Main menu – B Telnet Timeout Minutes
Parameter
Explanation
B Telnet time-
out minutes
Set the Timeout function in
minutes.
0 = no timeout
5 = when no changes have
been made within the previous
five minutes. Press the Back-
space key to clear the factory
setting and enter the new time.
7.3.9 Configuring Telnet access
When you use Telnet, you have the same adminis-
trative rights as for the serial interface. If access is
not to be made using Telnet, you can deactivate it.
Navigation
Main menu – C Enable/Close Telnet
Parameter
Explanation
C Enable /
Close Telnet
Use the
ĸ
and
ĺ
arrow keys to
enable or disable Telnet.
7.3.10 Saving and activating the
settings
To accept and save all changes and network set-
tings, the network interface must be restarted.
Navigation
Main menu – D Activate Actual Values
Parameter
Explanation
D Activate
actual values
Use the
ĸ
and
ĺ
arrow keys to
perform a restart (Yes) or not
(No).
7.3.11 Entering the units to be monitored
You must enter in the Master the units to be moni-
tored. This is done as follows:
Navigation
Main menu – 2 IP Addresses of Devices
Parameter
Explanation
1-10 IP ad-
dress of device
1 – 10
Enter the IP addresses to be
monitored by the CMC-TC Mas-
ter II. Press the “Backspace”
key to clear the factory setting
and then enter the new IP ad-
dress.
