RITE-HITE FROMMELT SAFETY PRODUCTS GUARDIAN DEFENDER, Manual

Page: 10 / 48

10 PUB. NO. DFNDRB JANUARY 2013
DEFENDER ™
MOTOR ROTATION / ENCODER CONNECTION
MOTOR ROTATION OPTIONS
Bottom Mount
ENCODER CONTROLS - (FEATURE RICH)
DO NOT SPLICE THE CONTROL WIRING
Top Mount
Rear Mount
Front Mount
10.1
10.3
Encoder collar, if removed torque
to 14 in/lbs (2 MM Allen wrench)
Connect encoder cable to encoder.
Make sure to line up pins properly.
Make sure connector is tight, but do
not over-tighten, as pins will twist.
Once tight, the connector should not
be able to move back and forth.
10.2
Step 1:
Loosely attach encoder
plate to gearbox and
sprocket to the shaft,
then attach chain.
Gearbox installation is the same
as the limit switch installation.
10.4
Torque Arm
Installation