PUB. NO. DFNDRB JANUARY 2013
15
DEFENDER
™
INTERLOCK / HOLD DOWN
INTERLOCK INSTALLATION
1.
Interlocks are optional, if present install per
Figure 15.1,
and wire per wiring diagram on
Pages 26 - 35.
2.
Some switches may need to be adjusted after operation.
3.
Adjust curtain stops on guides with curtain in closed position.
4.
Curtain blocks MUST be fully seated into stop bracket.
5.
Once the switches are aligned vertically then adjust the
switch horizontally to align the switches.
HOLD DOWN INSTALLATION
1.
Complete after Interlock is adjusted,
Figure 15.3.
INTERLOCK CONTROLS
15.1
Adjust
Interlock
switch up
or down as
required
Attach
cover
STOP BRACKET ADJUSTMENT
15.2
Adjust Stop Bracket
to Curtain Block is
fully seated in groove
Align switch and actuator
Hold Down Installation
15.3
Hold Down pin will
lock into notch in
curtain guide block
Summary of Contents for FROMMELT SAFETY PRODUCTS GUARDIAN DEFENDER
