Advanced Features
Changing Default Settings [Admin.]
194
[Default]
Jump Wing Control
Change the default positioning of the Paper Jumping Wing.
Important!:
• This option is available only when the special paper setting
is pre-configured. Contact your dealer (or authorized
service representative) to pre-configure this setting.
ON,
OFF
Paper Ejection Adj
Change the default settings for “Air Blow” and
“Separation Fan”.
Air Blow 1: OFF,
ON
Air Blow 2: OFF,
ON
Separation Fan 1: OFF, 1, 2,
3
, 4
Separation Fan 2: OFF, 1, 2, 3,
4
Separation F+ 2: OFF, 1, 2,
3
, 4
Default Folder*
When the optional Document Storage Card is
attached, change the folder to which the data scanned
in the scan mode to be saved and the folder to save
the data sent from the computer.
Scan Data Folder: 1 to 6 folders
PC Job Folder: 1 to 6 folders
[System]
Custom Paper Entry
Specify paper dimensions before using non-standard
sized paper.
Irregular Fitter
Specifies to scan custom-size originals as standard-
sized.
ME9450U:
OFF
, Ledger, Legal,
Letter, LetterR,
Statement
ME9350/6350:
OFF
, A3, B4, A4,
A4R, B5, B5R,
Foolscap
Folder Renaming*
When the optional Document Storage Card is
attached, changes the name of the folder used to save
data.
6 folders
Stamp Data*
When the optional Document Storage Card is attached,
registers the stored data as a “Stamp”.
CI Select
Choose between “Internal CI” and “External CI” settings.
If the machine is equipped with the optional IS300,
select “External CI”.
Internal CI
, External CI
External CI Info *
If the machine is equipped with the optional IS300, set
the IP address to connect the machine to the network.
IP address settings differ depending on the type of network.
Note:
• To change an input source, touch the applicable
box, or press the
key to rotate options.
• If the message “Network Communication is Not
Possible” is displayed when touching
[External CI
Info]
, touch
[Cancel]
and wait for the IS300 to finish
starting up, and then try again.
• When using a DHCP server
[Use DHCP]
• When entering IP address
manually
[Manual Input]
or the Print Quantity
Keys.
Display Access
Button
Functions
Description
