Riso ME 6350, User Manual

Page: 46 / 306

Basic Operations
Printing from Paper Documents
46
9
Press the key.
Starts scanning the original for Print Drum (Cylin-
der) 1.
Once the scanning is completed, the master is
made for Print Drum (Cylinder) 1, and one proof
copy from Print Drum (Cylinder) 1 will be printed.
Then, the Master Making Basic Screen for Print
Drum (Cylinder) 2 appears.
Note:
• In step 6, if two originals have been placed
together in the ADF unit, one proof copy from
Print Drum (Cylinder) 1 only is printed, and the
master is subsequently made on Print Drum
(Cylinder) 2. Continue on to step 13.
• You can change the settings of “Auto Idling”.
) p.52
• When “Auto Process” is selected, the process
will be different.
) p.72
10
Place the original for Print Drum
(Cylinder) 2.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see
) p.42
11
Set the print functions for the Print
Drum (Cylinder) 2 original.
You can make various settings of the original for
Print Drum (Cylinder) 2 as needed.
If you make no settings, the same settings as the
first original are applied.
Note:
The print functions that can be set for the Print
Drum (Cylinder) 2 original are as shown below.
• Image ( ) p.64)
• Scanning Contrast ( ) p.66)
• Size ( ) p.67)
• Dot Process ( ) p.73)
• Contrast Adj ( ) p.74)
• Tone Curve ( ) p.75)
• Top Margin ( ) p.94)
• Binding margin ( ) p.96)
12
Press the key.
Starts scanning the original for Print Drum (Cylin-
der) 2.
Once the scanning is completed, the master is
made for Print Drum (Cylinder) 2, and a Dual-
Color proof copy will be printed.