Riso ME 6350, User Manual

Page: 90 / 306

Functions for Master-Making
Laying out continuous originals on one sheet of paper [Layout]
90
1
Select the Print mode.
Select Mono-Color or Dual-Color print.
To select the print mode, see
) p.29.
2
Set the original and print paper.
Place the original on the Glass Platen or in the
optional ADF unit.
For Dual-Color printing, set the original for the
Print Drum (Cylinder) 1.
To place the original, see
) p.42.
Important!:
• Be careful with the orientation of the original.
• When the ADF unit is used, after the set original
is scanned by a designated number of images,
the images are automatically laid out in the
order of Print Drum (Cylinder) 1 to Print Drum
(Cylinder) 2. Therefore, when the number of
originals used for one Print Drum (Cylinder) is
smaller than the number of images (when there
is margin), master-making is not performed cor-
rectly even if all originals are set.
For example, for Dual-Color printing of four
originals, you cannot let the 4th image to be
scanned as a margin by setting the 1st to 3rd
pages as the original for Print Drum (Cylinder) 1
and the 4th to 6th pages as the original for Print
Drum (Cylinder) 2.
When the number of originals used for one Print
Drum (Cylinder) is smaller than the number of
images, insert a number of blank sheets to off-
set the shortage between the originals for Print
Drum (Cylinder) 1 and the originals for Print
Drum (Cylinder) 2 or set the originals for each
Print Drum (Cylinder).
• Make sure to set the printing paper in the orien-
tation shown in the figure below (the long side
points in the direction of transfer).
3
Touch [Layout] on the Functions Screen.
4
Select the page size to use.
Touch the button corresponding to the size of the
original and touch
[Next>] .
The reproduction size is automatically set and the
Layout Screen is displayed.
5
Touch the button for the number of
images to set.
Touch the button for the number of images to be
laid out and touch
[Next>] .
Paper feeding direction