Replacing Consumables
Replacing the Master Roll
243
5
Open the Master Roll Holder.
6
Remove the depleted Master Roll.
Important!:
• Dispose the depleted Master Roll according to
the disposal rule of your local community.
7
Install a new Master Roll.
Remove the plastic shrink wrap from the new
Master Roll, and place in with the
mark to the
left.
Important!:
• Take care not to damage the
section when
removing the shrink wrap.
If the
section is bent or the perforation cut,
the master will become unusable.
• Do not remove the tape yet.
8
Close the Master Roll Holder.
Remove the tape once the Master Roll Holder has
been closed.
9
Insert the leading edge of the Master
Roll into its entrance under the Mas-
ter Guide Flap.
Insert the leading edge until it stops (
). If the
master is loose, turn the flange at the right inward
to rewind (
).
Master Roll Holder
Do not remove
the tape
Master Guide Flap
Flange
